This is the support page for the AirMini Travel Auto CPAP Machine and related products. This page is intended to help you with all of your post-purchase needs. Simply click on the links below to be taken directly to the section within the page.
Q What masks is the AirMini compatible with?
A The AirMini is only compatible with these masks:
- AirFit P10 FOR AirMini (The AirFit P10 and AirFit P10 for Her that do not come with a set up pack are NOT compatible with the AirMini)
- AirFit N20/ AirFit N20 for Her
- AirFit F20
- AirTouch F20/ AirTouch F20 for Her
- AirFit F30
Q What setup pack works for each mask?
A
- Only the P10 mask that comes with the setup pack works with it, no other masks are compatible
- AirTouch F20
- AirTouch F20 for Her
- AirFit F20
- AirFit F30 (for specifics on setting up the AirFit F30 with the AirMini, check out the question below)
Q How do I set up my AirFit F30 with the AirMini?
A
1) Fit you mask according to the instructions in your mask user guide
2) Remove the AirFit F30 original mask elbow and replace it with the AirMini F20 connector elbow
3) Connect the AirMini tubing from the device to connector elbow
4) Ensure the AirMini device is properly set up and switched on.
Q What is included in each setup pack?
A
- P10 Setup Pack: AirMini tubing, P10 Mask Connector, P10 Mask for AirMini, 1 HumidX and 1 HumidX Plus Waterless Humidifier
- N20 Setup Pack: AirMini Tubing, N20 Mask Connector, N20 Mask NOT INCLUDED, 1 HumidX and 1 HumidX Plus Waterless Humidifier
- F20 Setup Pack: AirMini Tubing, F20/ F30 Mask Connector, NO MASK INCLUDED, NO HumidX or HumidX Plus Waterless Humidifier due to compatibility issues.
Q Where is the air filter on my AirMini device?
A
As you may be able to tell in the image below, the filter is located on the side of the machine, near the hose connector. Follow the guidelines below in order to ensure optimal usage of your AirMini device when it comes to using a filter.
Q How do I use humidification and what masks does it work with?
A The HumidX and HumidX Plus are the AirMini's humidifiers. They need to be replaced 30 days after opening, and you can use one or the other. It works with the AirFit N20, AirFit N20 for Her, and the AirFit P10 for the AirMini. It is unfortunately not compatible with the full face masks. To be directed to the video on humidification, click HERE.
Q Does the AirMini work with all CPAP Cleaners?
A Yes, the AirMini works with all CPAP cleaners sold by ApriaDirect. To be used with the SoClean, however, this adapter must be purchased and used.
Q Is there a free trial on this machine?
A Yes, there is a 30 day free trial on this machine. Check out our return policy HERE for more information.
Q Do the set up packs come with masks?
A Only the P10 set up pack comes with a mask. (Note: Only the P10 Mask that comes with the set up pack can be used with the AirMini, so if you already had a P10 mask, it will not work)
Q Is the AirMini auto-adjusting?
A Yes, the AirMini auto-adjusts pressure throughout the night to best fit your needs.
Q Is the AirMini FAA (Federal Airline Administration) approved for use in-flight?
A Yes, the AirMini is approved by the FAA.
Q Is there a way to make the AirMini quieter?
A Unfortunately, the AirMini is the only Travel CPAP machine that is not compatible with the Qtube, so there is no way to reduce the noise.
Q What are the pressure increments of the AirMini? Why is this important?
A The AirMini has pressure increments of 0.2. This means that your prescription must come in this format. If your prescription calls for 10.5, 12.3, or something similar, the AirMini is not the appropriate Travel CPAP (or you can request a new prescription). However, if your prescription calls for 11.4, 8.6, or something similar, the AirMini is the only Travel CPAP that fits this.
Q How often do I need to replace my setup pack?
A Setup packs need to be replaced once every six months.
Q How often do I need to replace my AirMini filters?
A Filters need to be replaced once every 4-6 months. They can be purchased HERE.
Q Can I wash my filters?
A No, AirMini filters are not designed to be washed.
Q What are the necessary components of a CPAP prescription?
A A complete and accurate CPAP prescription contains all of the following information:
- Must indicate one of the following: Continuous Positive Airway Pressure, or CPAP
- Your physician's signature
- Your physician's contact information
- The patient's full name
- Your specific single pressure setting: ____ CM/H20
- Valid date
Q What are the necessary components of an APAP prescription?
A A complete and accurate APAP prescription contains all of the following information:
- Must indicate one of the following: AutoPAP, APAP, Auto Adjusting or Self Adjusting CPAP, Auto Set, Auto CPAP, Continuous Positive Airway Pressure or CPAP
- Your physician's signature
- Your physician's contact information
- The patient's full name
- Your pressure range: from ____ to ____CM/H20
- Valid date
Introduction
Starting your Therapy
Setting Up
How to Inspect and Replenish your AirMini
First Impressions
Testimonial #1
Testimonial #2:
Introduction to the HumidX
Explanation of ActiveAir Vent
Unboxing
How to find the right mask
Setup Pack Videos
Assembly
Preventing leaks
Fitting (Overall)
Fitting (Headgear)
Maintenance
ApriaDirect carries a wide variety of products and accessories compatible with the AirMini designed to make your sleep therapy experience as comfortable, convenient, and cost-effective as possible. Here are some product recommendations:
Required Products:
- AirMini Travel Auto CPAP Machine: The AirMini device itself.
-
A setup pack
- P10 Setup Pack: Nasal Pillow Option for the AirMini. Includes AirMini tubing, P10 Mask Connector, P10 Mask for AirMini, 1 HumidX and 1 HumidX Plus Waterless Humidifier
- N20 Setup Pack: AirMini Tubing, N20 Mask Connector, N20 Mask NOT INCLUDED, 1 HumidX and 1 HumidX Plus Waterless Humidifier
- F20 Setup Pack: AirMini Tubing, F20/ F30 Mask Connector, NO MASK INCLUDED, NO HumidX or HumidX Plus Waterless Humidifier due to compatibility issues.
- AirMini Filters: This pack includes two filters which should each last between 4 and 6 months.
- If not using the AirFit P10 setup pack AND mask, one of these masks is required with corresponding setup pack:
Strongly Recommended:
- Pilot-24 Battery: This battery is the only one offered for the AirMini. When using it with the AirMini, you must use either the Medistrom AC Power Adapter or ResMed Original AC Power Adapter for AirSense 10.
- AirMini Premium Carry Bag: Premium travel bag designed to hold AirMini CPAP machine, CPAP accessories, tubing and a CPAP mask.
- AirMini Hard Travel Case: This hard travel case has enough space for the AirMini device and is useful to protrect the AirMini from daily knocks and spills.
- AirMini Mount System: The AirMini Mount System is a convenient mount made out of fabric that allows you to fasten your AirMini device to various places such as the bedframe, bedside table, airplane seat pocket, or a wall.
- HumidX Standard: Choose from a 3 or 6 pack. Each one expires 30 days after opening, not necessarily 30 days of use. The HumidX Standard works for most climates and environments.
- HumidX Plus: Choose from a 3 or 6 pack. Each one expires 30 days after opening, not necessarily 30 days of use. The HumidX plus is optimized for dry and high altitude environments where humidity levels are low, such as on an airplane
Comments
0 comments
Please sign in to leave a comment.